Tenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V – 12V) Perfect for RC or Airsoft Battery Packs — NEW!

Tenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V – 12V) Perfect for RC or Airsoft Battery Packs — NEW!

  • Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6V, 7.2V, 8.4V, 9.6V, 10.8V and 12V
  • Smart Charger with automatic voltage detection
  • Temperature sensor to protect battery pack from over heating
  • Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack’s cycle life
  • Red LED will be on during charging

Features and Benefits

* Universal for any NiMH /NiCd battery packs 6V – 12V (5-10 Cells Pack)
* Fast charger with current switch to select either 1A or 2A
* Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh
* Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours
* Automatically charging ending with negative delta V
* Worldwide usage with 120-240V AC

Accessories Included

* 1 standard Tamiya connector with Temperature Sensor.
* 1 adapter from standard Tamiya to Mini Tamiya.
* 1 adapter from standard Tamiya to a pair of alligator clip.

Operation Instruction

* Connect battery pack to output connector and plug AC power source
* Make sure battery polarity is connected correctly (Red wire is positive)
* Charger will detect battery voltage automatically, Red LED will be on during charging
* When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
* Don’t charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
* Battery pack must be made by high drain current cell
* Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse.

Caution

* The charger is designed for indoor use only. Don’t leave the charger unattended during charging.
* The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
* Don’t cover the charger when charging, ambient temperature shall not be more than 40oC
* Don’t touch the plug.
* Don’t leave the batteries and chargers on wood surface or carpet.
* Cut off the power supply before connect or disconnect the charger with batteries.
* Don’t try to disassemble the charger; High voltage inside!



Find More Airsoft Charger Products

Leave a Reply

Your email address will not be published. Required fields are marked *

Airsoft Tags: