Smart

Tenergy Universal Smart Charger for Nimh/nicd Battery Packs Reviews

Tenergy Universal Smart Charger for Nimh/nicd Battery Packs

  • Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
  • Fast charger with current switch to select either, 0.9A and 1.8A. Delivers full charge within 1 – 2 hours
  • Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack’s cycle life
  • Worldwide usage with 120-240V AC
  • Safety protection fuse for over current, short circuit & reverse polarity protection

Model: JLC002-21 , 1025 Tenergy Universal Smart Charger with Temperature Sensor for 6V-12V NiCad & NiMH Batteries. Air Gun cases. An absolute must for any airsoft AEG batteries, RC, or other electric products. Integrated technology avoids battery overheating and significantly increases battery pack’s cycle life. Automatic cut-off when charger detects maximum voltage charge Product Features: Universal Smart Charger from Tenergy Smart Charger for any NiMH/NiCD battery packs from 6V-12V (5-10 cell pack) 100-240V AC input for worldwide voltage support Uses Pulse and negative pulse technology. Automatic Cut-Off Two current levels, 1.0A and 2.0A are selected by a switch Accessory 1 standard Tamiya Female connector and Fuse house with the smart battery charger. 1 connector adapter from standard Male Tamiya to Mini Femal 1 set of clip adapter with Male Tamiya connector on one end. Operation Instruction Connect battery pack to output connector and plug in AC power source. Make sure battery polarity is connected correctly (Red wire is positive) Charger will detect battery voltage automatically, Red LED will be on during charging When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on. The charger is designed for indoor use only. Don’t leave the charger unattended during charging. The Charger should be horizontally positioned and work in well ventilated condition, avoid wet and keep it away from inflammable explosive goods. Don’t cover the charger when charging, ambient temperature shall not be more than 40oC Don’t touch the plug. Cut off the power supply before connect or disconnect the charger with batteries. Don’t try to disassemble the charger, High voltage inside, danger!



Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V – 12V with charging current Selection/Temperature Sensor

Tenergy Smart Universal Charger for NiMH / NiCd Battery pack 7.2V – 12V with charging current Selection/Temperature Sensor

  • Best Charger for charging all RC Car, RC air and Airsoft battery packs 7.2V, 8.4V, 9.6V and 12V.
  • Fast charger with current switch to select either, 0.9A and 1.8A. Deliver full charge within 1 – 2 hours.
  • Worldwide usage with 120-240V AC.
  • Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack’s cycle life.
  • Safety protection fuse for over current, short circuit & reverse polarity protection

Accessories Included

* 1 standard Tamiya Female connector and Fuse house with the smart battery charger.
* 1 connector adaptor from standard Male Tamiya to Mini Female.
* 1 set of clip adaptor with Male Tamiya connector on one end.
* 2 additional fuses

Smart Charger Specification

* FOR 6V-12V NI-MH/NI-CD BATTERY PACK 6-10PCS BATTERY
* Input: AC100-240V
* Output: 6-12V 0.9or1.8A

Operation Instruction

* Connect battery pack to output connector and plug AC power source.
* Make sure battery polarity is connected correctly (Red wire is positive)
* Charger will detect battery voltage automatically, Red LED will be on during charging
* When battery is fully charged, current will reduce to trickle charging at 50mA,Green LED will be on
* Battery will be charged at 0.9A or 1.8A constant current,
* Approximate Charging time is about 1.5hrs for 3000mAh battery,1hr for 1800mAh battery.
* The charger is designed for faster charging NiCd and NiMH battery packs from 6 to 12V for RC car/Air and Air soft gun.
* Don’t charge battery packs with voltage less than 6V or voltage greater than 12V and capacity smaller than1100mAh.
* Battery pack must be made by high drain current cell.
* Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misusage.

Caution

* The charger is designed for indoor use only. Don’t leave the charger unattended during charging.
* The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep it away from flammable explosive goods.
* Don’t cover the charger when charging, ambient temperature shall not be more than 40oC
* Don’t touch the plug.
* Don’t leave the abtteries and chargers on wood surface or carpet.
* Cut off the power supply before connect or disconnect the charger with batteries.
* Don’t try to disassemble the charger, High voltage inside, danger!



Related Airsoft Charger Products

Tenergy Smart AC Charger for 8.4V-9.6V Batteries w/ Mini Female Tamiya Connector for Airsoft Gun Batteries

Tenergy Smart AC Charger for 8.4V-9.6V Batteries w/ Mini Female Tamiya Connector for Airsoft Gun Batteries

  • Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells).
  • Please use the charger for battery packs with capacity of 1100-1600mAh.
  • Compact battery pack charger with LED
  • Automatically stop when battery pack is fully charged by Delta Peak detection.
  • Built in mini female tamiya connector.

Features and Benefits:

* Smart Charger for NiMH battery packs of 8.4V-9.6V (7-8 cells).
* Please use the charger for battery packs with capacity of 1100-1600mAh.
* Able to auto distinguish bad battery and indicate malfunction.
* Able to activate over-discharged cells.
* Current ram-up way benefits cell capacity and life cycle.
* Unique test mode guarantees high quality.
* Automatically stop when battery pack is fully charged by Delta Peak detection.
* Short circuit & reverse polarity protections.
* Compact battery pack charger with LED.
* Built in mini female tamiya connector.

Includes:

* Smart AC Charger for 8.4 – 9.6V NiMH Battery Pack.
* Instruction Manual.
* Packaged in box.

Specifications:
Rating Input Voltage 100~240V AC 50/60Hz
Rating input current 2Amp
Input power <11W Output voltage Rating 8.4V/9.6V VDC Output voltage range 7V DC~12DC Charge Current 600+_60mA Trickle Current 200+_20mA Max Output Power 7.3W Operating Temperature -10~30*C (UL Certification) Charging Temperature <60?C Storage Temperature -30~85*C Maximal -Delta V 5mV/cell Cell Voltage <1.56V/cell Operating Humidity <90% RH Warning: * This appliance is not intend to be used by persons (including children) with reduced physical, sensory, mental capacities, or lack of experience and knowledge concerning the use of appliance. * Children should be supervised to ensure that they do not play with the appliance.



Find More Airsoft Charger Products

Tenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V – 12V) Perfect for RC or Airsoft Battery Packs — NEW!

Tenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V – 12V) Perfect for RC or Airsoft Battery Packs — NEW!

  • Best Charger for charging all RC Car, RC Airplane and Airsoft battery packs 6V, 7.2V, 8.4V, 9.6V, 10.8V and 12V
  • Smart Charger with automatic voltage detection
  • Temperature sensor to protect battery pack from over heating
  • Use pulse and negative pulse technology to avoid battery overheating during fast charging, optimized for battery pack’s cycle life
  • Red LED will be on during charging

Features and Benefits

* Universal for any NiMH /NiCd battery packs 6V – 12V (5-10 Cells Pack)
* Fast charger with current switch to select either 1A or 2A
* Charging Current 1A for battery packs with capacity from 1000mAh -1800mAh
* Charging Current 2A for battery packs with capacity above 2000mAh. For 3000mAh pack, charging time is apprx. 1.5 hours
* Automatically charging ending with negative delta V
* Worldwide usage with 120-240V AC

Accessories Included

* 1 standard Tamiya connector with Temperature Sensor.
* 1 adapter from standard Tamiya to Mini Tamiya.
* 1 adapter from standard Tamiya to a pair of alligator clip.

Operation Instruction

* Connect battery pack to output connector and plug AC power source
* Make sure battery polarity is connected correctly (Red wire is positive)
* Charger will detect battery voltage automatically, Red LED will be on during charging
* When battery is fully charged, current will reduce to trickle charging at 50mA, Green LED will be on
* Don’t charge battery packs with voltage less than 6V or greater than 12V and capacity smaller than 1000mAh or larger than 5000mAh
* Battery pack must be made by high drain current cell
* Please contact your seller for instruction. Mfg is not responsible for any damage and consequent damage by Misuse.

Caution

* The charger is designed for indoor use only. Don’t leave the charger unattended during charging.
* The Charger should be positioned horizontally and work in well ventilated condition, avoid water and keep away from flammable explosive goods.
* Don’t cover the charger when charging, ambient temperature shall not be more than 40oC
* Don’t touch the plug.
* Don’t leave the batteries and chargers on wood surface or carpet.
* Cut off the power supply before connect or disconnect the charger with batteries.
* Don’t try to disassemble the charger; High voltage inside!



Find More Airsoft Charger Products

Tenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V – 12V) Perfect for RC or Airsoft Battery Packs — NEW!

Tenergy Universal Smart Charger for NiMH/NiCd Battery Packs (6V – 12V) Perfect for RC or Airsoft Battery Packs — NEW!

  • Universal Smart Charger from Tenergy
  • Smart Charger for any NiMH/NiCD battery packs from 6V-12V (5-10 cell pack)
  • 100-240V AC input for worldwide voltage support
  • Uses Pulse and negative pulse technology. Automatic Cut-Off
  • Two current levels, 1.0A and 2.0A are selected by a switch

An absolute must for any airsoft AEG batteries, RC, or other electric products. Integrated technology avoids battery overheating and and significantly increases battery pack’s cycle life. Automatic cut-off when charger detects maximum voltage charge



More Airsoft Charger Products

TSD Universal Smart Charger 7.2-12V for NiCad & NiMH batteries

TSD Universal Smart Charger 7.2-12V for NiCad & NiMH batteries

  • AIRSOFT ACCESSORIES

The TSD ERUSC01 can charge large and small plug NiMH and NiCD airsoft batteries.



Universal Smart Charger for Airsoft NiCad & NiMH

  • Light Indicator when Charging
  • Charging style will Re-energize some Dead Intelllect Battery Packs.
  • Auto Trickle Charge Function
  • Large & Small Tamiya Adaptor
  • 7.2v – 12v Selector Switch

Universal Smart Charger for NiCad & NiMH Airsoft Batteries. 0.9Amp or 1.8Amp Output Select.



Airsoft Tags: